Most people call for sewer rodding because something is clearly wrong. Water is backing up, a drain won’t clear, and they want it fixed. The idea of sending a camera down the pipe first usually doesn’t cross their minds, and many homeowners aren’t sure why anyone would add that step.
There are good reasons, and there are also times when we’d tell you to skip it and clear the line first. This guide covers both sides. If you’re deciding whether to book a camera inspection along with, or before, rodding, you’ll know what to expect by the end.
We’re Rodding Rooter, and we’ve worked on Chicago-area sewer lines for more than 20 years. What follows is how we’d explain it across the kitchen table.
What a sewer camera inspection actually is
A sewer camera inspection uses a small waterproof camera on the end of a flexible cable. The technician feeds it into the line through a cleanout, and a monitor shows what the camera sees as it moves through the pipe. It’s the plumbing equivalent of looking inside instead of guessing from the outside.
The camera shows the pipe’s material, its condition, any roots that have grown in, buildup on the walls, cracks, offsets and sags. It can also show where something is wrong by distance, so a repair, if one’s needed, can be planned around a precise spot instead of a rough guess. You can read more about the service itself on our sewer camera inspection page.

The case for looking before you rod
Rodding is a good tool. It cuts through roots, grease and debris and gets water moving again. But it works blind. A technician pushes a cable through the pipe and relies on feel, resistance and what comes out. A camera replaces some of that guesswork with evidence.
You find out what you’re dealing with
A line that clogs because of grease needs a different approach than one that clogs because roots have taken over, and both differ from a line that has a broken section. If you know which situation you’re in before you start, you can choose the right method the first time.
You avoid damaging a fragile pipe
Older clay tile and cast iron can be brittle. A cutting head that works well on a sound pipe may snag on a cracked joint or a pipe that’s already partly collapsed. Looking first lets the technician choose the right head and the right approach, or decide that rodding isn’t safe at all.
You prevent the “clear it again and again” cycle
The most expensive sewer problem is the one you keep paying to clear. If a line needs rodding every few months, something is causing it. A camera finds that something, whether it’s a root entry point, a low spot where water pools or a joint that’s slipped out of line.
You get a record
A recording of the pipe’s condition is useful long after the job is over. It shows what the line looked like on a particular day, which helps if you’re comparing quotes, talking to an insurer or deciding what to do about repairs.
When a camera first makes the most sense
We’d recommend looking before you rod in situations like these.
- Repeated backups. If the line has clogged more than once in a year, don’t just clear it again. Find out why.
- Buying an older home. A sewer line you can’t see is a big unknown. A camera inspection before closing can reveal problems that a standard home inspection might miss.
- Suspected damage. If you’ve seen soggy spots in the yard, sinkholes or a persistent sewer smell, the pipe may be cracked or collapsed.
- Old pipe material. Clay tile, cast iron and older fiber conduit can all have unique failure patterns. Knowing which you have matters.
- Before a big project. Planning a basement remodel, a new bathroom or landscaping over the sewer line? Check the pipe first.

When rodding should come first
Here’s the honest other half. Sometimes a camera can’t go first, because the line is blocked so completely that the camera can’t pass through. If sewage is already in your basement, the priority is to get the water moving again, not to produce a pretty recording.
In those cases, we clear the line first and inspect it afterward. It’s the right order for an emergency. Once the water is flowing, a camera pass can show what was behind the blockage, and we can explain what we found. Our sewer rodding service is built around exactly that: fast relief first, answers right after.
If you’re not sure which situation applies to you, call us and describe what’s happening. We’ll tell you whether a camera makes sense now, later or not at all.
What the camera typically shows
People are sometimes surprised at how much a camera reveals, so here’s a quick tour of what we look for.
- Roots. Fine, hair-like roots at joints, or heavier masses that fill much of the pipe. Our post on tree roots in your sewer line explains how they get in.
- Grease and scale. A rough, coated pipe wall that narrows the opening. This is where hydro jetting often makes sense.
- Offsets and separations. Joints where one pipe section has shifted relative to the next, leaving a lip that catches debris.
- Bellies. Low spots where the pipe has sagged and water sits instead of draining.
- Cracks and breaks. Visible damage that lets roots in and waste out.
- Foreign objects. Things that don’t belong in a sewer line, but are there anyway.
Not every line has problems. Plenty of inspections end with “the pipe looks fine, it was a one-time clog.” That’s good news, and it’s worth knowing.
What happens after the camera finds something
This is the part that worries people most, so let’s be plain. A camera inspection doesn’t commit you to anything. It’s information.
If the pipe looks healthy, you’re done. You’ve paid for peace of mind and a baseline recording. If the camera shows buildup, we’ll talk about whether jetting makes sense. If roots are the issue, we’ll discuss clearing them and possibly a schedule to keep them in check. If the pipe is damaged, we’ll explain what sewer line repair might involve, along with the trade-offs.
In each case, you see what we see. We don’t ask you to take our word for it. If a recommendation can’t be backed by the picture on the screen, we’re not comfortable making it.

How a camera inspection affects cost
A camera pass adds a line to the estimate, and that’s the reason some people skip it. But think about where the money goes otherwise. A line that keeps clogging means repeated service calls. A hidden crack that goes unnoticed can become an expensive repair or a flooded basement. The camera costs less than those outcomes.
It’s also useful for comparison shopping. If one company says you need a repair and another says you don’t, a recording settles the question. Our guide to the average cost of sewer rodding explains how different options add to an estimate.
Questions to ask any company about a camera inspection
Whether you hire us or someone else, these questions help you get a useful inspection.
- Will I get to see the video, and can I keep a copy?
- Will the technician explain what’s on the screen as we go?
- Does the camera record the distance to any problems it finds?
- What happens if the camera can’t pass a blockage?
- Is the inspection a separate charge or part of the rodding visit?
A good answer to all five is a sign that you’re dealing with a company that wants you to understand your pipe, not just pay for a visit.
What a good inspection looks like from your side of the screen
If you’ve never watched a sewer camera at work, it helps to know what a good visit feels like. The technician starts by talking with you about the history of the line: when problems began, which drains are affected and whether anything has been repaired. Then they locate the cleanout, protect the floor around it and feed the camera in.
You’ll usually see a live picture of the inside of the pipe. A clean section looks smooth and round, with a steady stream of water along the bottom. Trouble spots stand out: a ragged ring of roots, a pale crust of grease, a sudden step where one pipe meets another. A good technician will pause on each one and explain what it is and how serious it looks, rather than letting the camera run past in silence.
[img:653|White plumbing pipes with fittings|Clear pictures and plain explanations are the point of an inspection, not a stack of technical jargon.]
When the inspection ends, you should know three things: where the pipe is healthy, where it isn’t and what your sensible options are. If anything is unclear, ask. A company that welcomes questions at this stage is usually one that will keep treating you fairly if repairs come up.
Common myths about sewer cameras
“A camera will find a problem whether or not there is one.” Not true. Many inspections show a healthy line, and that’s a useful result. The camera reports what’s there.
“It’s only for big repair jobs.” Plenty of people use it for small questions: why does this keep clogging, or is it safe to plant a tree near the line?
“Rodding will tell the plumber everything.” Rodding tells a technician about resistance and what comes out. It doesn’t show a hairline crack, a sagging section or the exact spot where roots enter.
“If the drain is working now, the pipe is fine.” A line can drain normally on a dry day and still have real damage. It’s only when something stresses it, like a storm or a full house of guests, that the weakness shows.
How often should you inspect your line?
There’s no need to run a camera through a healthy line every year. For most homes, an inspection makes sense when there’s a reason: a backup, a purchase, a suspected problem or a plan to dig. Older lines with large trees nearby may deserve a look every few years. Our post on how often to clean your sewer line goes through the factors.
Book a sewer camera inspection with Rodding Rooter
If you’re thinking about a camera inspection, with rodding or on its own, call us at (773) 588-1200 or send a message. We’ll ask what’s going on, explain the options and give you an estimate before we start. Same-day service is often possible, and emergency calls are answered day or night.
The short answer to the question in the title: if your line is flowing and you have a reason to doubt it, look first. If your basement is filling up, clear it first. And in both cases, we’ll show you what we found.
Sewer camera inspection: common questions
Should I get a camera inspection before sewer rodding?
If the line has backed up more than once, or you suspect damage, looking first is smart. If sewage is already coming into your home, clearing the line comes first and the camera follows once the water is flowing.
Can a camera go through a fully blocked sewer line?
Usually not. A completely blocked line has to be cleared before the camera can pass. That is why emergency calls start with rodding and add the inspection afterward.
Will I get a copy of the camera recording?
Ask before the visit. A good company will show you the video as it plays and explain what it means, and many will provide a copy on request.
How long does a sewer camera inspection take?
Often less than an hour, but it depends on the length of the line, the access and what the camera finds along the way.
Is a camera inspection worth it when buying an older house?
It can be. A sewer line is hidden, and problems there can be costly. An inspection before closing shows whether the pipe is in good shape or needs attention.
Does a camera inspection fix anything?
No. It shows what is going on inside the pipe so you can choose the right fix, whether that is rodding, jetting, a repair or nothing at all.